How to Jumpstart a Car Safely: 5 Essential Steps Every Driver Should Know Before Roadside Battery Emergencies
カートのアイテムが多すぎます
ご購入は五十タイトルがカートに入っている場合のみです。
カートに追加できませんでした。
しばらく経ってから再度お試しください。
ウィッシュリストに追加できませんでした。
しばらく経ってから再度お試しください。
ほしい物リストの削除に失敗しました。
しばらく経ってから再度お試しください。
ポッドキャストのフォローに失敗しました
ポッドキャストのフォロー解除に失敗しました
How to Jumpstart a Car Safely: 5 Essential Steps Every Driver Should Know Before Roadside Battery Emergencies
-
ナレーター：
-
著者：
このコンテンツについて
Picture this: you're running late for work, you turn your key in the ignition, and... nothing. Just that sad clicking sound. Don't panic! Jumpstarting a car isn't rocket science, and knowing how could save your day.
First things first, you'll need jumper cables and another vehicle with a working battery. Position both cars close enough that the cables will reach, but make sure they're not touching. Safety first—turn off both vehicles completely.
Now for the connection sequence, which is crucial to get right. Think "red to dead" to start. Connect the red positive cable to the positive terminal on your dead battery—it's marked with a plus sign or sometimes covered with a red cap. Then connect the other end of the red cable to the positive terminal on the good battery.
Next, take the black negative cable and connect it to the negative terminal on the good battery. Here's the tricky part—don't connect the final black clamp to the negative terminal on the dead battery. Instead, attach it to an unpainted metal part of the engine block away from the battery. This creates a safer ground connection and reduces the risk of sparks near the battery.
Double-check all connections are secure. Now, start the engine of the vehicle with the good battery and let it run for a few minutes. This allows some charge to flow to your dead battery. Then, try starting your car. If it starts, great! If not, wait a few more minutes and try again.
Once your car is running, don't turn it off! You'll need to keep it running for at least 20 minutes to give your alternator time to recharge the battery. This is the perfect excuse for a scenic drive or a coffee run.
When disconnecting, reverse the order: remove the black cable from the engine block first, then from the good battery, followed by the red cables. This prevents any sparking.
Remember, if your battery frequently dies or your car won't jumpstart at all, it might be time for a new battery or to check your alternator. And never attempt to jumpstart a cracked or leaking battery—that's just asking for trouble.
Thanks for tuning in to "1000 Things You Need to Know." If you found this helpful, be sure to subscribe for more practical knowledge delivered to your ears weekly. This has been a quiet please production, for more check out quiet please dot ai.
For more check out https://www.quietperiodplease.com/
Here is a 1000 ways to save money https://amzn.to/4iaM94Q