エピソード

  • Heat Pump Homeowner main episode for 2026-07-27

    Heat Pump Homeowner main episode for 2026-07-27
    2026/08/24
    In this episode of Heat Pump Homeowner, Blake outlines practical steps for owners of older homes ready to switch to air source heat pumps in 2026. Discover why skipping a proper load calculation often leads to oversized units that short cycle, create noise, and raise electric bills. Learn how to measure rooms, check attic insulation depth, test ducts for leaks, and seal gaps with mastic before any contractor arrives. The discussion covers outdoor unit placement to reduce noise and vibration, selecting models rated for your area's lowest winter temperatures, and using backup heat only during rare cold snaps. Find out how to compare three detailed bids against current utility rebates and state incentives while avoiding humidity issues from poor sizing.

    Key takeaways:
    - Perform a room-by-room assessment and Manual J load calculation first
    - Measure square footage, insulation, and duct leaks to right-size equipment
    - Prioritize sealing ducts and proper outdoor placement for steady performance
    - Gather bids that list model numbers and match them to available rebates

    📩 Have questions or want to share your experience? Reach out at heat@senseofthisshit.com.
    https://www.spreaker.com/podca...
    続きを読む 一部表示
    4 分
  • Heat Pump Homeowner 2026: Duct Sizing for Cold Weather Performance

    Heat Pump Homeowner 2026: Duct Sizing for Cold Weather Performance
    2026/08/17
    In this episode of Heat Pump Homeowner, Blake launches the 2026 Guide by tackling the real challenges of swapping a furnace for an air source heat pump in older homes. Discover why duct sizing and precise load calculations often decide comfort and costs, plus how to avoid shortfalls on cold days or noisy operation. Get actionable steps like recording your current ducts, pulling twelve months of utility bills, scheduling a duct leakage test, and quizzing three installers on cold-weather performance and sound levels before any equipment is ordered.

    Key takeaways:
    - Document duct age, size, gaps, and uneven rooms this week
    - Gather utility bills for a clear baseline
    - Request Manual J reports and compare capacity at your design temperature
    - Check state incentives and deadlines immediately
    - Evaluate noise ratings and supplemental heat options

    These preparations reduce surprises and keep your project on track.

    📩 Have questions or want to share your experience? Reach out at heat@senseofthisshit.com.
    https://www.spreaker.com/podca...
    続きを読む 一部表示
    5 分
  • Navigate Heat Pump: Homeowner 2026: Older Home Ductwork Incentive Checks

    Navigate Heat Pump: Homeowner 2026: Older Home Ductwork Incentive Checks
    2026/07/13
    In this episode of Heat Pump Homeowner, Blake breaks down the 2026 updates for switching an older home to an air source heat pump. Learn how outdated ductwork, noise concerns, cold-weather efficiency drops, and shifting incentives can derail projects from day one. Discover three practical pre-install checks to measure airflow, verify rebates, and seal insulation gaps that prevent costly surprises and underperformance.

    Key takeaways:
    - Run a full load calculation on-site instead of guessing capacity to avoid short cycling and humidity issues.
    - Measure static pressure and balance ducts with mastic sealing or dampers for even airflow in milder heat pump temperatures.
    - Review decibel ratings, use rubber isolators, and test variable-speed models to minimize neighbor noise complaints.

    These steps keep your system efficient even below freezing while maximizing incentives.
    📩 Have questions or want to share your experience? Reach out at heat@senseofthisshit.com.
    https://www.spreaker.com/podca...

    📩 Have questions or want to share your experience? Reach out at heat@senseofthisshit.com.
    💛 Join Our Supporters Club ($3 a month) 💛 Ad-free listening + early episodes — help keep independent media alive. Click Here: https://www.spreaker.com/podca...
    続きを読む 一部表示
    5 分
  • Understanding Heat Pump: Existing Homes Air-Source Heat Pumps

    Understanding Heat Pump: Existing Homes Air-Source Heat Pumps
    2026/07/11
    In this episode of Heat Pump Homeowner, we tackle the practical challenges of installing air-source heat pumps in existing homes. From rising energy bills with outdated furnaces to uneven heating, many homeowners seek efficient upgrades but worry about sizing, compatibility, and costs. Blake breaks down essential steps like starting with a precise load calculation based on insulation and windows to avoid oversized or undersized units. We explore ductwork assessments for sealing leaks and adjusting airflow since heat pumps deliver milder air than furnaces. Noise concerns from outdoor compressors get addressed through strategic placement and decibel comparisons, while winter performance shines with variable-speed models, automatic defrost, and optional backup strips for cold snaps. Incentives such as federal tax credits and utility rebates can significantly offset expenses when you select ENERGY STAR-qualified units.

    Key takeaways:
    - Begin with a professional load calculation to match system capacity to your home.
    - Evaluate and upgrade ductwork for proper static pressure and efficiency.
    - Prioritize low-temperature-rated models and smart placement to minimize noise.
    - Leverage available incentives by verifying eligibility before purchase.

    📩 Have questions or want to share your experience? Reach out at heat@senseofthisshit.com.
    💛 Join Our Supporters Club ($3 a month) 💛 Ad-free listening + early episodes — help keep independent media alive. Click Here: https://www.spreaker.com/podca...
    続きを読む 一部表示
    5 分