• Easy fix for RodecasterPro 2 stereo issue

  • 2023/04/02
  • 再生時間： 5 分
  • ポッドキャスト
『Easy fix for RodecasterPro 2 stereo issue』のカバーアート

Easy fix for RodecasterPro 2 stereo issue

無料で聴く

ポッドキャストの詳細を見る

  • サマリー

  • I recorded a music show and while it sounded okay, I felt something was a bit off – but couldn’t put my finger on it. The music seemed to be stereo, but it wasn’t. There was something up and I had no idea what it could be. Was it just that I was listening to the output of a different mixer after all these years?… No, it was more than that. A few days ago, I had time to delve deeper into the settings of my music channel, and as I went through the processing options to turn each one off, right at the end, the final option was the stereo balance – or panning as Rode calls it.  The default setting out of the box is to send the left signal to both left and right channels – and to do the same for the right channel – leading to an output that I’d call ‘dual mono with a twist’. To achieve true stereo is an easy fix. Click the square button on the channel you want to change, go Advanced Processing > Panning Option (L-R) > turn the left channel 100% left and the right channel 100% right. I would not use this setting for the microphone, as mics are mono – one mouth, one mic, mono. UPDATE: You can also try disabling the panning option by turning it off for channels used for music. Your feedback is always welcome. All the best, Steve.
    続きを読む 一部表示

あらすじ・解説

I recorded a music show and while it sounded okay, I felt something was a bit off – but couldn’t put my finger on it. The music seemed to be stereo, but it wasn’t. There was something up and I had no idea what it could be. Was it just that I was listening to the output of a different mixer after all these years?… No, it was more than that. A few days ago, I had time to delve deeper into the settings of my music channel, and as I went through the processing options to turn each one off, right at the end, the final option was the stereo balance – or panning as Rode calls it.  The default setting out of the box is to send the left signal to both left and right channels – and to do the same for the right channel – leading to an output that I’d call ‘dual mono with a twist’. To achieve true stereo is an easy fix. Click the square button on the channel you want to change, go Advanced Processing > Panning Option (L-R) > turn the left channel 100% left and the right channel 100% right. I would not use this setting for the microphone, as mics are mono – one mouth, one mic, mono. UPDATE: You can also try disabling the panning option by turning it off for channels used for music. Your feedback is always welcome. All the best, Steve.
続きを読む 一部表示

Easy fix for RodecasterPro 2 stereo issueに寄せられたリスナーの声

カスタマーレビュー：以下のタブを選択することで、他のサイトのレビューをご覧になれます。

Audible.co.jp

Amazon.co.jp
レビューはまだありません。