『FitcamX Dash Cam: Factory Look, Professional Results』のカバーアート

FitcamX Dash Cam: Factory Look, Professional Results

FitcamX Dash Cam: Factory Look, Professional Results

無料で聴く

ポッドキャストの詳細を見る

【Amazonプライム会員限定】今ならプレミアムプランが4か月 月額99円。

10月19日まで。※適用条件あり
Make a Logo on Fiverr A dash cam can be useful after a collision, but many models look like an afterthought once they are stuck to the windshield and surrounded by visible cables. FitcamX takes a cleaner approach with vehicle-specific camera systems designed to blend into the area around the rearview mirror. The FitcamX dash cam tested here combines front and rear recording, collision detection, parking monitoring and app access in a system that looks more like factory equipment than a typical add-on camera. Installation requires some work, and the exact parts vary by vehicle, but the finished result is discreet and capable. FitcamX supplied the product and sponsored the accompanying video. All opinions are those of Geekazine. A Dash Cam Designed Around Your Vehicle FitcamX offers configurations for many vehicle makes and models. On supported vehicles, the camera can replace or integrate with the factory housing around the rearview mirror, giving it a cleaner appearance than a universal dash cam mounted in the middle of the windshield. The version tested was an aftermarket configuration installed in an older Chevrolet Trailblazer. It uses a compact housing that mounts close to the windshield rather than a larger vehicle-specific shroud. Buyers should check FitcamX compatibility carefully because the camera housing, power cable and installation method can differ from one vehicle to another. Keeping the camera close to the glass is important. A tight fit helps reduce reflections and light leaking into the lens from inside the vehicle. The front lens can be tilted up or down after installation, while the rear camera also needs to be adjusted after it is attached to the back window. 4K Front Recording and Optional Rear Coverage FitcamX configurations can record the front view at up to 4K resolution, or 2160p at approximately 30 frames per second. Rear-camera resolution depends on the package, with 1440p and 1080p options available. The camera uses an f/1.6 aperture, a 160-degree viewing angle and wide dynamic range to improve visibility in changing light. A 64GB microSD card was included with the review unit, and the system supports cards up to 256GB. Loop recording automatically overwrites older files when the card fills, allowing the dash cam to continue recording without requiring regular manual cleanup. The front and rear cameras create separate video files. That means footage from the same drive must be matched by time when both angles are needed. It adds an extra step, but it also keeps each recording easy to view or export on its own. Collision Detection and Parking Monitoring A built-in G-sensor gives the FitcamX smart dash cam its collision detection capability. The system can react to an impact and preserve footage, including while the vehicle is parked when constant power is available. The camera normally operates from the vehicle’s 12-volt system and can switch to a lower-power 5-volt mode after the vehicle is turned off. That helps reduce battery drain while keeping parking protection available. Any always-on accessory can still affect an aging battery, so drivers who leave a vehicle unused for long periods should monitor battery condition or disconnect the camera. Collision sensitivity is adjustable. A high setting may cause more frequent activations and use more battery, while the low setting used during testing did not create problems. The best setting will depend on where the vehicle is parked and how often normal movement or vibration triggers the sensor. Installation Requires Planning The package includes trim tools and the cabling needed to route power and connect the rear camera. Hiding the cables requires carefully working them behind the vehicle’s interior trim from the front camera to the power source and rear window. Power can be connected through a compatible fuse-box hardwire kit or an optional OBD adapter, depending on the vehicle and FitcamX package. A fuse-box installation requires identifying constant and switched power sources. Drivers who are not comfortable working with automotive electrical connections should have the system installed professionally. The OBD connection used during testing made the installation easier to manage and provided a convenient way to unplug the camera before an extended trip. Availability and price of the OBD adapter vary by vehicle, and it may need to be purchased separately. The optional rear camera mounts inside the vehicle and is not weatherproof. Hatchback owners may need several attempts to position it correctly because the viewing angle changes when the hatch is opened. Cleaning the glass thoroughly before applying the adhesive is also essential; the review unit’s rear camera came loose when it was attached over a small amount of residue. Wi-Fi App Access Has One Annoying Limitation Built-in 2.4GHz Wi-Fi lets iOS and Android devices connect directly to the FitcamX. The app provides a live view for aiming the lenses, changing ...
adbl_web_anon_alc_button_suppression_t1
まだレビューはありません