Send us Fan Mail

Jay Aho (N8QYQ) came back to ham radio after 20 years away and, about a year later, had an APRS digipeater and a Winlink gateway running 210 feet up on the Detroit Masonic Temple. In this episode he tells James (K8JKU), Jim (N8JRD) and Rory (W8KNX) how it happened: a childhood friend who happens to manage the building, trustees who said yes to emergency communications, and a whole lot of learning along the way.

Jay explains why he picked a low-gain Diamond X30 and 30 watts instead of blasting the region, why the site runs as a WIDE1-1 fill-in digipeater to be additive to the network rather than competitive, and how it now shows 93 miles of coverage on aprs.fi. He gets into the build itself, a Raspberry Pi 4 running Dire Wolf for APRS and a hardened Windows mini PC for VARA FM Winlink, each feeding a Yaesu FTM-3100 at 30 watts, plus watchdogs, auto-boot after a power loss, remote access, LiFePO4 battery backup, and the surprisingly easy grounding story. He also introduces Detroit Never Goes Silent, a lobby exhibit where visitors scan a QR code and receive an email that traveled over radio, and talks about the effort to fund an ARPSC station at Detroit's Emergency Operations Center.

Before the interview, the crew covers Jason KN4AL's 1000th POTA activation, Activate All RI 2026, the new POTA website beta, building shack dashboards with Claude Code, and everything they've learned about the Icom IC-7110 since Tokyo Ham Fair.

Topics in this episode:
Icom IC-7110 specs, pricing and release speculation
Activate All RI 2026, September 11-13
The new POTA website beta at next.pota.app
Shack dashboards built with Claude Code
Jay N8QYQ's Detroit APRS digipeater and Winlink gateway
Diamond X30, WIDE1-1 fill-in and 93 miles of coverage
Raspberry Pi 4, Dire Wolf, VARA FM and a hardened Windows mini PC
Detroit Never Goes Silent and the Detroit EOC station

Don't miss a single episode! Follow the Everyday Ham Podcast on your favorite podcast platform (Apple Podcasts, Spotify, Overcast, and more) and be sure to subscribe to our YouTube channel.

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

QSL is one of the most used words on the air and one of the least understood. When Jim asked what it actually stands for, all three of us stopped cold, so we spent an episode getting it right.

James (K8JKU), Jim (N8JRD) and Rory (W8KNX) work through what QSL really means, why keeping a log and confirming a contact are two different things, and how to navigate paper cards, QRZ Logbook, ARRL Logbook of the World and Club Log without drowning in it. Rory tells the story of the operator from Oregon who wrote him a letter after waiting 42 years to work one rare Michigan county, and makes the case that refusing to confirm cheats somebody else out of the state, grid or county they have been chasing. James walks through his own workflow honestly, cumbersome parts included, and Rory does the same. If you are new to HF and have not started logging yet, this is the foundation nobody hands you.

Before the main topic, Rory puts money down on the Icom ID-5200A and defends the price, Icom teases the X-026 ahead of HAM Fair 2026, Kenwood's TM-D750A firms up for September, and James argues the MacBook Neo is the best portable ham radio laptop you can buy right now.

In this episode:
Icom ID-5200A pre-order and the $999.95 question
The Icom X-026 teaser and HAM Fair 2026
Kenwood TM-D750A, September and day-one APRS
The MacBook Neo as a portable ham radio laptop
A new-in-box Alinco DJ-C5 for $85
Xiegu G7250, remote operating and 100 meters of Ethernet
What QSL actually means, and why logging is not QSLing
Paper cards, QRZ, Logbook of the World and Club Log
Our real QSLing workflows, start to finish
Ohio and Hawaii QSO Parties, August 22

Watch the full episode on YouTube: https://youtu.be/HhhoVukJI3s

Don't miss a single episode! Follow the Everyday Ham Podcast on your favorite podcast platform (Apple Podcasts, Spotify, Overcast, and more) and be sure to subscribe to our YouTube channel.

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

What happens when a club stops treating Field Day like an endurance contest and starts treating it like a neighborhood open house? In this episode, James (K8JKU), Jim (N8JRD), and Rory (W8KNX) unpack the South Lyon Area Amateur Radio Club's reinvented Field Day, a community-first event in the middle of town with big printed signs at every antenna, a Get On The Air station, and newcomers like Cruz (KF8GNL) making their first HF contacts. The club nearly doubled last year's score with 1,193 contacts across three stations, but the real win was the dog walkers, museum visitors, and first-timers who stopped to see what ham radio is all about.

Before that, the crew recaps chasing the 13 Colonies Special Event through a wild solar storm, including a last-minute D-Star scramble to bag the Great Britain bonus station. They also give an honest, no-hype first look at the Buddipole BuddiHEX hex beam, cold solder joint and all, and break down the brewing showdown between the Icom ID-5200 and Kenwood TM-D750A mobile radios.

Topics in this episode:
13 Colonies Special Event and rough band conditions
Monroe Ham Swap finds
Reinventing Field Day around community
Getting new operators on the air
Buddipole BuddiHEX first impressions
Icom ID-5200 vs Kenwood TM-D750A

Don't miss a single episode! Follow the Everyday Ham Podcast on your favorite podcast platform (Apple Podcasts, Spotify, Overcast, and more) and be sure to subscribe to our YouTube channel.

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

Ep. 18 – Has Parks on the Air hit its peak? James (K8JKU), Jim (N8JRD), and Rory (W8KNX) debate the future of POTA, from its explosive growth to what the declining solar cycle means for portable operators, and whether the program is in its twilight or just entering its golden years.

The conversation comes fresh off the Third Annual Michigan POTA Meetup, where the guys spent a weekend camping, activating, and sharing campfire stories with about 70 POTA enthusiasts at Hartwick Pines State Park. They talk about what actually brings hams together, why community is the best part of this hobby, and how to find or start a meetup in your own area.

Also in this episode: the Everyday Ham merch store is officially live at everydayham.com, a Hamvention attendance stat correction, shout-outs to Penn (AC8XI) and Rob (N1RWJ), and around the shack updates from all three hosts.

Learn more about the meetup at michiganpotameetup.com, and if you love POTA, consider donating at parksontheair.com.

Don't miss a single episode! Follow the Everyday Ham Podcast on your favorite podcast platform and subscribe to our YouTube channel at @EverydayHam.

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

A concept radio with "almost nothing" on display managed to dominate Hamvention 2026, and we can't stop talking about what that means for the future of ham radio. We're fresh back from Dayton, a little punchy, and ready to unpack the best conversations we had with vendors, makers, and listeners who recognized our voices across the noise of the fairgrounds. If you care about where mobile rigs, repeaters, and digital features are headed next, this recap is loaded with real impressions and honest skepticism.

We dig into the biggest manufacturer moments first: Yaesu's DR-3 repeater direction and the next steps for System Fusion, Kenwood's long-awaited TM-D750A progress and why "ship it later" can be the right call when firmware isn't ready, and Icom's X-026 concept strategy that had people cheering, arguing, and even storming away. We debate whether asking the community for feedback is a bold move or a frustrating tease, and why market size, R&D timelines, and expectations at Hamvention don't always align.

Then we get practical with gear that feels closer to daily use, especially the Icom ID-5200. We talk interface upgrades, smart mobile touches like auto-dimming, and the big headline that grabbed our attention: native APRS encode and decode via firmware update. We also zoom out to the rest of the show, from Four Days in May and small vendor innovation to CW key makers, swap meet pricing, and what the flea market "junk scale" looked like this year.

If you like this kind of grounded ham radio coverage, subscribe, share the show with a friend headed to their next hamfest, and leave us a review on Apple Podcasts or Spotify. Then come hang out with us in Discord and drop your take: is the X-026 hype brilliant or annoying?

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

The fastest way to waste Hamvention is to treat it like a random walk. We're getting ahead of Dayton with the game plan we wish we had on day one: how to pace the weekend, when to hit the flea market swap meet, how to avoid the worst lines, and why the forums can be the most underrated part of the whole show.

We also catch up from our shacks, because real ham radio life is never just shopping. Rory shares lessons from the Michigan QSO Party and why CW contesting is the best training ground for finally hearing callsigns at speed. James brings the portable angle with travel radio, Parks on the Air stories from Hawaii and the Grand Canyon, and what it takes to make a station work when you're far from home. Jim talks simple antenna building with a 9:1 setup and what he's learning by hosting a club System Fusion repeater and helping keep local machines on the air.

Then we get into the big Hamvention gear energy: ICOM's X-026 concept has the internet buzzing about a mobile rig that could merge HF with VHF/UHF in a clean install. Kenwood's TM-D750A is still the question everyone wants answered. And Yaesu staying quiet has us all guessing what comes next in handhelds and battery life. If you're heading to Dayton, you'll leave with practical tips you can use immediately and a checklist mindset that keeps the weekend fun.

Subscribe for our Hamvention field coverage, share this with a ham who's traveling to Dayton, and leave a review if the show helps you plan smarter.

What's the one thing you refuse to miss at Hamvention this year?

📢 Subscribe & Follow! 🎧 Audio: https://www.everydayham.com 📺 YouTube: @EverydayHam 📷 Instagram: @everydayhampodcast

73!

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

Space travel didn't get safer, we just got used to it. That's the feeling driving our Artemis II nerd-out as we watch humans loop the Moon again for the first time since the Apollo era, with Orion pushing distance records and reminding everyone that deep space is still the bleeding edge.

We start with real-life radio talk, because our hobby is built on practical lessons: Jim resets his brain by stepping away from the shack, then immediately buys a Xiegu G90 for a lightweight, throw-it-in-the-car HF kit. Rory shares how getting an antenna outside changes everything, plus the rhythm of QSO party season and adding more CW into the toolbox. James brings field notes from POTA in Hawaii, where being remote changes your expectations, your patience, and especially your battery math.

Then we go full Artemis. We laugh about the one topic every mission forces into the open -- the toilet -- and why creature comforts are actually crew performance issues. We talk Orion's tight quarters, the surprisingly modern feel of mission control, and the communications backbone that keeps the whole thing working. From the Deep Space Network to next-gen optical laser comms, we dig into bandwidth limits and how proven gear like GoPros and a Nikon D5 earns its seat on a moon mission. We bring it back to ham radio with licensed astronauts on the crew, volunteer tracking efforts, and the thrill of hearing space comms piped onto VHF.

Follow Everyday Ham: 🎙 Website: https://www.everydayham.com 📺 YouTube: https://www.youtube.com/@EverydayHam 📷 Instagram: https://www.instagram.com/everydayhampodcast/

Don't miss a single episode! Follow us on Apple Podcasts, Spotify, Overcast, and more -- links at EverydayHam.com.

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/

Send us Fan Mail

Your logging app is not just a logbook anymore, and Ham2K PoLo is proof. We sit down with Sebastián Delmont KI2D, the creator and lead developer of PoLo, right as his Ham2K LoFi cloud sync service goes live. If you have ever exported an ADIF file, emailed it to yourself, merged duplicates, or realized your other device has the QSO you need, this conversation hits home fast.

We dig into what Ham2K LoFi actually does and why syncing ham radio logging data is more complex than tossing files into iCloud. PoLo syncs at the QSO level, has to survive offline activations, and needs to merge cleanly when you reconnect. Sebastián also breaks down the practical side: app store subscription approvals, backend costs, and why he chose a pricing model that stays approachable at $2.99 a month or $24.99 a year, with a free tier designed to cover most operators while protecting server load.

Then we zoom out to the fun part: what sync enables next. Think shared logs for multi-op POTA and SOTA days, QR code log sharing, and a path toward Field Day logging without the laptop maze. We also talk about upcoming tools like a web-based log browser for easy desktop ADIF export, future push uploads to services like QRZ and POTA, and a bigger Log Filer vision that can import ADIF archives and unify your QSO history across sources like Logbook of the World.

If you are looking for a modern ham radio logging workflow that works on iOS, Android, and even Apple Silicon Macs, hit play and come along for the roadmap. Subscribe, share this with a friend or clubmate, and leave a review. What would you want PoLo to automate next?

Short show intro audio clip

Short outro audio clip

The Everyday Ham Podcast is hosted by James Mills (K8JKU), Jim Davis (N8JRD), and Rory Locke (W8KNX) – three friends who dive into the world of amateur radio with a casual, lighthearted twist.

Follow us at: Website: https://www.everydayham.com/