Compressed air system optimization is one of the highest-ROI energy decisions available to industrial operators — and one of the most consistently ignored.

This is Energy Decision #39 in the complete C&I energy management series from Tactical Energy Group. 100 decisions. Every one that matters.

In this episode, Daniel Burke covers:

Why compressed air typically runs about 10% of industrial electricity use — but can reach 40% at some facilities — and why most operators treat it as a fixed cost.

How leak losses of 20–50% are the norm, not the exception, and what a single 1/8-inch leak costs annually at 100 psig.

The 2 psi / 1% power relationship and how pressure reduction multiplies your leak repair savings through artificial demand reduction.

Why inlet modulation is the least efficient part-load control mode — and when variable speed drive compressors earn their cost.

How shutting down compressors at end of shift can save up to 30% in energy cost with zero capital investment.

The six-phase implementation sequence: baseline, leaks and pressure, inappropriate air use, controls, heat recovery, structural upgrades.

How utilities in states with active C&I efficiency programs may fund a compressed air audit and a portion of the resulting investment.

How to justify a compressed air project to a CFO using net margin math.

Who this is for: plant managers, facility managers, and operations executives at industrial manufacturing, food and beverage, automotive, textile, and pharmaceutical facilities who are spending more on compressed air than they realize and don't have a structured plan to recover it.

If you're trying to figure out how to reduce energy consumption and operational costs tied to your industrial compressed air system, this episode is built for you.

Read the full breakdown on compressed air system optimization at tac-nrg.com

If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at blueprint.tac-nrg.com.

Visit tac-nrg.com for more practical tools and the Energy Decision Blueprint for qualified Indiana C&I operators.

0:00 – What does compressed air actually cost your facility?

1:30 – How much does a compressed air leak cost per year?

3:00 – Artificial demand: why over-pressurization makes leaks worse

4:30 – Control systems and the shift-shutdown savings nobody talks about

6:00 – The six-phase optimization sequence

7:00 – Audits, utility incentives, and your next step