JetLube 550 Extreme® — the Low E nonmetallic anti-seize compound that solves thread seizure, hot-torque friction loss, and fugitive-emission compliance in a single brush-top can. Built on a calcium sulfonate complex base with balanced molybdenum disulfide and surface-modified synthetic graphite, 550 Extreme is the petrochemical flange bolting lubricant your maintenance specs have been waiting for. Browse the full anti-seize lineup: https://www.pe-energy.com/product-category/anti-seize-compounds/

Zero heavy metals. Real API 622 Low E fugitive emission compliance. Unlike copper, nickel, or lead-loaded products, 550 Extreme contains no metallic pigments — making it directly compatible with Low "E" valve and flange standards now required across refinery and petrochemical facilities. Pair it with graphite stem packings and your control or isolation valves meet API 622 Low E fugitive emission criteria without formulation compromises. For companion sealing on the same valve, Jet-Lube V-2 handles the job: https://www.pe-energy.com/product/35555-jet-lube-v-2-1-4-pt-brush-top/

Spec-grade physical data that holds up under scrutiny. NLGI Grade 1 consistency (ASTM D-217 penetration 315–335 at 77°F) keeps the compound pumpable and stable. Dropping point hits 450°F (232°C) per ASTM D-2265; flash point exceeds 430°F (221°C); oil separation stays below 5.0 wt. % at 212°F. The 4-Ball weld point clocks 800 kgf (ASTM D-2596) with a load wear index of 100 — genuine extreme-pressure protection. Salt fog resistance: 500 hours corrosion-free at 100°F in 20% NaCl per ASTM B-117. Copper strip corrosion rating is 1A — no attack on copper alloys. Specific gravity 1.22, density 10.2 lb./gal.

Published nut factors that tighten your torque-tension control. Understanding how JetLube 550 Extreme prevents thread seizure and hot-torque friction loss starts with the K values. On 1-inch uncoated B7 studs using T = K × D × F: K = 0.15 at 80 ksi tension, K = 0.18 at 50 ksi, K = 0.19 at 30 ksi. That narrow 0.04-point spread across a three-to-one tension range means your ASME PCC-1 bolt-up procedures stay accurate. The balanced MoS2/graphite formulation also resists the friction-function drops that high-MoS2 products (over 40% loading) exhibit when hot-torqued in the 250–400°F range — critical for coker drumhead bolting and heat exchanger breach block re-assembly during turnarounds. Order the 1 lb brush-top can here: https://www.pe-energy.com/product/jet-lube-extreme-all-weather-450-ml-brush-top/

Operating range from cryogenic to extreme heat, across nearly every base material. Static cryogenic service to -265°F (-165°C); select high-temperature applications to 2400°F (1316°C); brushable performance to -10°F (-23°C). Compatible with steel, stainless, cast iron, titanium, copper, brass, alloys, and plastics. Endorsed for valve bonnet and flange bolting, valve stem assembly, delta valve bolting, LPG and gas service, slides, guides, keyways, and carbon steel or high-nickel alloy fasteners. Conforms to MIL-PRF-907F and Raytheon Specification M8656839 Type III. Manufactured in ISO 9001:2015 and ISO 14001:2015 certified facilities. Wholesale orders scale from a single spare to a full turnaround kit — see the complete JetLube catalog: https://www.pe-energy.com/brand/jet-lube/

Resources

https://www.pe-energy.com/product/jet-lube-extreme-all-weather-450-ml-brush-top/

https://www.pe-energy.com/product-category/anti-seize-compounds/

https://www.pe-energy.com/brand/jet-lube/

https://gravatar.com/peenergymx

https://gravatar.com/taylorindustrialequipment