『IC Markets Referral Code 89420 — Complete Guide on How to Use It IC Markets Referral Code』のカバーアート

IC Markets Referral Code 89420 — Complete Guide on How to Use It IC Markets Referral Code

IC Markets Referral Code 89420 — Complete Guide on How to Use It IC Markets Referral Code

著者： IC Markets referral code
無料で聴く

The IC Markets referral code is 89420. Also called the Introducing Broker code or IB code. It gives you Raw Spread pricing from 0.0 pips and leverage up to 1:5000 on eligible accounts. This guide skips the filler and covers only what actually matters when you are setting up your account for the first time. Currently active. The One Decision That Affects Every Trade Before you think about instruments, leverage, or strategies — pick the right account type. This single choice determines your cost on every trade for as long as you use IC Markets. Standard: spread starts from 0.8 pips. No commission. You pay more per trade but the pricing is simple. One number. Raw Spread on cTrader: spread starts from 0.0 pips. Commission $3.00 per side ($6 round turn). Cheapest option available. Raw Spread on MetaTrader: spread starts from 0.0 pips. Commission $3.50 per side ($7 round turn). Choose this only if you need MT4/MT5 for Expert Advisors. The math is clear. One lot of EUR/USD costs $8 to $10 on Standard. Same lot costs $6 to $8 on cTrader Raw. You save $2 to $4 on every lot. Trade 10 lots a day and that is $20 to $40 saved daily. Trade for a year and the difference is thousands of dollars. If you trade more than a couple of lots per day, choose Raw Spread. If you need EAs, choose Raw Spread on MetaTrader. If you do not need EAs, choose Raw Spread on cTrader and save $1 per round turn on top. The referral code 89420 gives you access to Raw Spread on both platforms. Set Up in 30 Minutes Use the referral link — 89420 applies automatically. Or enter it in the IB code field during registration on ic.com. Fill in your details. Upload your passport or ID plus a utility bill or bank statement for address proof. IC Markets verifies most accounts within hours. Pick Raw Spread on cTrader or MetaTrader. Deposit $200 minimum — Visa, Mastercard, PayPal, Skrill, Neteller, bank wire. No deposit fees. Download your platform. Log in. You are trading on Raw Spread pricing with sub-40ms execution from your first order. What Your First Week Should Look Like Day 1: place a small test trade. 0.01 lots on EUR/USD. Watch the raw spread — it will sit at 0.0 to 0.2 pips during London-New York overlap. Confirm the commission matches expectations ($0.06 per side on cTrader for 0.01 lots). Close the position. Your first Raw Spread trade is done. Day 2 to 3: explore instruments. IC Markets has 2,250+ — 61 forex pairs, 2,100+ stock CFDs, 25 indices, 28 commodities, bonds, futures, crypto. Do not trade all of them. Pick 3 to 5 you want to focus on. Watch how spreads behave across sessions. Day 4 to 5: establish your routine. Set up chart templates. Configure alerts. If you run EAs, deploy them on the free VPS IC Markets provides. If you use TradingView, connect it to your IC Markets account for direct execution. By end of week one you understand your cost structure, your platform, and your core instruments. Everything from here is strategy and discipline. The Leverage Question IC Markets offers up to 1:5000 on eligible accounts. What you actually get depends on where you live. Australia or EU (retail): 1:30 maximum. Regulatory cap. Not IC Markets' choice. EU (professional classification): up to 1:500. Requires meeting qualification criteria. International (FSA Seychelles): highest tiers up to 1:5000. Code 89420 routes you to the right entity. High leverage is not for beginners. At 1:5000, a 0.02% move against you liquidates the position. Use leverage for capital efficiency — holding multiple small positions with less margin locked — not for oversizing. IC Markets provides negative balance protection on all accounts regardless of leverage. Three Things IC Markets Does Better Than Most Execution speed. Under 40 milliseconds average. Equinix NY4 and LD5 data centers — same facilities as major banks. 25+ liquidity providers. Over $29 billion in daily forex volume processed. When you click buy, you get filled. Cost structure. Raw Spread from 0.0 pips with the lowest retail commission on cTrader at $3.00 per side. Across thousands of trades, this adds up to more than any promotion or bonus a competitor offers. Track record. Since 2007. ASIC and CySEC regulated — Tier-1. 200,000+ active clients. 4.8/5 Trustpilot across 55,000+ reviews with 92% five stars. In an industry full of brokers that appear and disappear, 18 years of continuous operation under top-tier regulation is rare. Copy Trading If You Are Not Ready to Trade Alone IC Markets integrates with IC Social, ZuluTrade, Myfxbook, and MetaTrader Signals. Browse traders with verified records. Set your account to copy their positions automatically. Every copied trade executes at Raw Spread pricing with sub-40ms speed when your account is set up with code 89420. You benefit from the same execution quality as manual traders while learning from someone else's strategy. If You Already Have an IC Markets Account Open a new additional account through the referral link. Code 89420 applies...Copyright 2026 All rights reserved.
エピソード
  • IC Markets Referral Code 89420 — What It Is, How It Works, and Where to Enter It

    IC Markets Referral Code 89420 — What It Is, How It Works, and Where to Enter It
    2026/09/02

    The IC Markets referral code is 89420.

    IC Markets calls it an Introducing Broker code. Some traders search for it as an IB code, partner code, or affiliate code. All of these refer to the same field on the registration form. Enter 89420 and your account is configured for Raw Spread pricing from 0.0 pips with leverage up to 1:5000 on eligible accounts. Currently active.

    That is the quick answer. The rest of this page explains what Raw Spread actually means for your money, which platform saves you the most, and the three things most people get wrong during registration.

    The reason this code matters comes down to one number — your cost per trade.

    IC Markets runs two pricing models. The Standard model bakes a markup into the spread. EUR/USD starts from 0.8 pips. No separate commission. Simple to understand but expensive to trade on. One standard lot costs roughly $8 to $10.

    The Raw Spread model — unlocked by code 89420 — strips the markup out. You see the raw interbank price. EUR/USD sits at 0.0 pips during peak liquidity. Instead of a markup you pay a flat commission. On cTrader that commission is $3.00 per side. On MetaTrader 4 or 5 it is $3.50 per side.

    Total cost per lot on cTrader Raw: $6 to $7. On MetaTrader Raw: $7 to $8. On Standard: $8 to $10.

    The gap is $2 to $4 per lot. That is the value of the referral code expressed in dollars. Multiply it by every lot you trade for the rest of your time on IC Markets.

    Most traders pick MetaTrader without thinking about it. If you do not run Expert Advisors, that decision costs you $1 per round turn on every trade.

    cTrader charges $3.00 per side. MetaTrader charges $3.50. Same spreads. Same execution. Same instruments. Same account. The only difference is the commission and the interface.

    At 20 lots per day the $1 difference is $20 daily. $440 monthly. $5,280 annually. At 50 lots per day: $50 daily, $1,100 monthly, $13,200 annually. This is not a rounding error. It is a real cost difference determined by which button you click during registration.

    Pick cTrader unless you specifically depend on MT4 Expert Advisors. If you already chart on TradingView, connect your IC Markets account there and execute directly from charts.

    The code goes into the registration form on ic.com. Look for a field labeled referral code, IB code, or campaign. Enter 89420. If you register through a partner link the code is embedded and applies automatically.

    Three things people get wrong here.

    First — they skip the field entirely. It may be collapsed or look optional. It is not optional if you want Raw Spread pricing through this code.

    Second — they register through Google or Apple login without checking whether the code field appeared. Some social login flows skip it.

    Third — they assume the code can be added later. It cannot. IC Markets does not support retroactive code entry. If your account is created without 89420, you need to open a new additional account and transfer funds.

    Leverage through code 89420 reaches 1:5000 on eligible accounts. What you actually receive depends on your country.

    If you are in Australia or the EU as a retail client, regulators cap you at 1:30. This is not IC Markets' choice. EU professional clients can qualify for up to 1:500. International clients through the FSA Seychelles entity access the highest ratios. The code routes you to the best available entity for your location.

    Negative balance protection applies on all accounts at any leverage level.

    IC Markets has been operating since 2007 from Sydney. Regulated by ASIC and CySEC — both Tier-1. Over 200,000 active clients in 200 countries. $29 billion in daily forex volume. Execution averages under 40 milliseconds on Equinix NY4 and LD5 servers. 25+ liquidity providers. True ECN — no dealing desk, no requotes. 4.8 out of 5 on Trustpilot across 55,000+ reviews.

    2,250+ instruments: 61 forex pairs, 2,100+ stock CFDs, 25 indices, 28 commodities, bonds, futures, and crypto. Raw Spread pricing covers everything.

    Copy trading runs through IC Social, ZuluTrade, and Myfxbook. Free VPS for algorithmic traders. Islamic swap-free accounts available — code 89420 applies fully.

    If you already have an IC Markets account created without the code, open an additional account through a partner link. The code applies to the new one. Transfer funds internally. Your existing account stays active.

    The referral code is 89420. Enter it once during registration. Pick cTrader Raw Spread for the lowest cost. That is it.
    続きを読む 一部表示
    3 分
  • How to Use IC Markets Referral Code 89420 to Get the Lowest Possible Trading Costs

    How to Use IC Markets Referral Code 89420 to Get the Lowest Possible Trading Costs
    2026/09/02
    IC Markets Referral Code The IC Markets referral code is 89420. Also called the IB code or Introducing Broker code. It unlocks Raw Spread pricing from 0.0 pips and leverage up to 1:5000 on eligible accounts. This article focuses on one thing — how to set up your account so you pay the absolute minimum on every trade. Currently active. The Cheapest Setup on IC Markets Not all IC Markets accounts cost the same. The referral code opens the door to Raw Spread pricing, but your platform choice determines the final number. The cheapest possible configuration: Raw Spread account on cTrader with referral code 89420. Your cost per lot on EUR/USD: $3.00 commission per side ($6.00 round turn) plus raw spread averaging $0 to $1. Total: $6 to $7 per lot. The second cheapest: Raw Spread on MetaTrader 4 or 5. Commission $3.50 per side ($7.00 round turn) plus raw spread. Total: $7 to $8 per lot. The most expensive: Standard account. Spread from 0.8 pips, no commission. Total: $8 to $10 per lot. Difference between cheapest and most expensive: $2 to $4 per lot. Over a year of active trading, this gap is worth thousands. How to Set It Up Go to ic.com. Start account registration. Find the IB code or referral code field. Enter 89420. Select Raw Spread as your account type. Select cTrader as your platform. If you run Expert Advisors and need MetaTrader, select that instead — but know you are paying $1 more per round turn. Fill in personal details. Upload ID and proof of address. Wait for verification — usually hours. Deposit $200 minimum. Download cTrader or MT4/MT5. Log in. Done. From your first trade, you are on the cheapest retail forex pricing available from a Tier-1 regulated broker. How to Use the Code for Scalping Scalpers execute 30 to 100+ trades per day with tight targets — 3 to 10 pips. At this frequency, cost per trade is everything. On cTrader Raw with code 89420: 50 lots per day at $6 to $7 per lot = $300 to $350 daily cost. On Standard without the code: same 50 lots at $8 to $10 = $400 to $500 daily. Saving: $100 to $150 per day. Monthly: $2,200 to $3,300. Annual: $26,400 to $39,600. Raw Spread at 0.0 pips also means tighter entry prices. A scalper targeting 5 pips enters at the actual market price, not at a price inflated by 0.8 pips of broker markup. The effective target improves on every single trade. Sub-40ms execution on Equinix servers means your orders fill before the market moves away. For scalping, speed is not a luxury — it is a requirement. How to Use the Code for Day Trading Day traders hold positions for minutes to hours. Typical volume: 10 to 30 lots per day. On cTrader Raw: 20 lots at $6 to $7 = $120 to $140 daily. Monthly: $2,640 to $3,080. On Standard: $160 to $200 daily. Monthly: $3,520 to $4,400. Saving: $880 to $1,320 per month. Day traders also benefit from 0.0 pip spreads on entries and exits. Entering a position 0.8 pips closer to the actual price and exiting 0.8 pips closer means 1.6 pips less drag per round trip. On a 20-pip target, that improves your risk-reward by 8%. How to Use the Code for Gold Trading Gold (XAU/USD) carries wider spreads than forex majors. The savings from Raw Spread pricing are proportionally larger. Standard account gold spread: approximately 2.0 to 3.0 pips — $20 to $30 per lot. Raw Spread gold: approximately 0.5 to 1.5 pips plus $6 to $7 commission = $11 to $22 per lot. Saving: $8 to $9 per lot. A gold trader doing 8 lots per day: saves $64 to $72 daily. Monthly: $1,408 to $1,584. Annual: $16,896 to $19,008. Gold's daily range — often 200 to 400 pips — creates frequent trading opportunities. On Raw Spread pricing with code 89420, the cost of capturing each one drops dramatically compared to Standard. How to Use the Code for Automated Trading Expert Advisors on MT4/MT5 or cBots on cTrader run 24/5 without manual intervention. Every automated trade benefits from Raw Spread pricing. An EA executing 100 trades per day on MT4 Raw: commission cost $700 daily. Same EA on Standard: approximately $800 to $1,000 in spread costs. Saving: $100 to $300 per day. IC Markets provides free VPS hosting. Your EA runs on a server near IC Markets' infrastructure — uninterrupted execution with minimal latency. No home internet outages killing your algorithm mid-trade. FIX API is available for strategies that need the absolute lowest latency. Direct market access bypassing the platform layer entirely. How to Use the Code for Copy Trading IC Social, ZuluTrade, Myfxbook, and MetaTrader Signals let you replicate experienced traders' positions automatically. Every copied trade runs at Raw Spread pricing when your account is configured with 89420. Active leaders execute 15 to 25 trades per day. Your account mirrors each one at $6 to $7 per lot on cTrader instead of $8 to $10 on Standard. The daily saving across 20 copied trades: $40 to $80. Monthly: $880 to $1,760. Copy trading on IC Markets gives you institutional execution quality on someone else's strategy at the...
    続きを読む 一部表示
    3 分
adbl_web_anon_alc_button_suppression_t1
まだレビューはありません